AIFLON 1000 Asbestos Packing Square
braided from high quality asbestos yarns, it has more
flexible structure.The grade of max.temperature is based
on your requiremengt,we"ll offer 350¡æ,in
general. AIFLON1002 Asbestos round braided packing
Same as PA1000,just round braided,suitable for the
places where the round type is required. AIFLON
1000G Graphited Asbestos packing with oil Braided from
high quality asbestos impregnated with graphite and
oil,it has a good elasticity and very good sliding
properties. 1000IGE Nickel Reinforced Asbestos
packing treated with graphite & rubber Good quality
asbestos packing treated with rubber and graphite inside
and outside coated, each yarn reinforced by a thin
nickel wire, other reinforced materials e.g. stainless
steel,brass etc. are also available. 1000IGR-2
Nickel Reinforced Asbestos packing treated with graphite
& rubber Same as 1000IGR, but only surface
graphite coated, it"s economical 1000P Asbestos
Packing with PTFE impregnation Long fiber white asbestos
impregnated with PTFE. It has anticorrostive and long
service properties. 1000PO Asbestos Packing with
PTFE & oil impregnation Same as 1000P, but
treated with a special lubricant. It is soft and can be
used for stainless steel or chromed shafts in the
presence of high peripheral speeds without etching them.
Application
1000
1002 |
Static sealing filler.
Used as filling material or a heat resistant
packing under high temperature and pressure.
PK1000 especially suitable for the places where
the square type is required |
| 1000G |
Dynamic sealing
To be used as a stuffing box in pumps
(especially boiler feed pumps) and in valves.
Resistant to alkaline solutions, inert fluids
(oils etc.),water, steam, gases, hot water and
salt solutions. |
1000IRG
1000IRG-2 |
Static sealing
Can be used for hand holes, manholes, lids as
static seal. Is suitable even under rough
operating conditions like in steam hammers,
reactors, steam valves etc. Also used for valves
and slow running equipment under high temperature
and pressure |
1000P
1000PO |
Static and dynamic
sealing
Especially suitable for a wide range of
applications for large rotary pumps in the medium
pressure rang. |
Service Limits
| Style |
1000/2 |
1000G |
1000IGR |
1000IGR-2 |
1000P |
1000PO |
| T |
350¡æ |
450¡æ |
550¡æ |
550¡æ |
260¡æ |
260¡æ |
| P |
|
80bar |
200bar |
150bar |
100bar |
100bar |
| V |
|
10m/s |
10m/s |
|
12m/s |
10m/s |
| PH |
4-10 |
4-10 |
2-13 |
2-13 |
2-13 |
2-13 |
| D(g/cm³) |
1.25 |
1.4 |
1.4 |
1.35 |
1.4 |
1.6 |
Normal Dimensions
| Style(mm) |
4 |
5 |
6 |
8 |
10 |
12 |
14 |
16 |
18 |
20 |
22 |
25 |
| m/kg |
40 |
27 |
17 |
10 |
7.5 |
4.5 |
3.5 |
2.8 |
2.2 |
1.8 |
1.4 |
1.1 |
| Kg/roll |
5 |
10 |
| This sheet is for PA
1000P¡¢1000G¡¢1000IRG£»1000PO:appr.+15£¥ |
|
